Honeywell M8185D1006 modutrol motor
Category: Modutrol Motor
Specifications
Honeywell M8185D1006 modutrol motor
Series 41 and Series 81 Modutrol IV motors are 2-position (lineand low-voltage per motor control) spring-return motors. They are used to operate dampers or valves in applications where it is necessary or desirable to have the controlled element return to the starting position in the event of power failure or interruption.
Fixed torque throughout the entire voltage range
Integral spring return returns motor to normal position in the event of power failure
Integral junction box provides NEMA 3 weather protection if motor is mounted in the upright position
Motor and circuitry operate from 24 Vac
Quick-connect terminals are standard screw terminal adapter is available
Adapter bracket for matching shaft height of older motors is available
Motors have field adjustable stroke (90 to 160 degrees)
Motors are designed for either normally open or normally closed valves and damper
Integral auxiliary switches are available factory mounted, or can be field added
Motors can operate valve linkages from the power end or auxiliary end shafts for normally closed or normally open valve applications
All models have dual shafts (slotted and tapped on both ends)
Features
Application: Electric
Control Signal: Two position, SPST
Frequency: 50 Hz; 60 Hz
Fail Safe Mode: Spring Return
Auxiliary Switch Ratings: AFL-120Vac-7.2A; ALR-120Vac-43.2A; AFL-240Vac-3.6A; ALR-240Vac-21.6A
External Auxiliary Switches Available: Yes
Shaft Rotation (upon control signal increase): Clockwise (as viewed from power end) (normally closed)
Electrical Connections: Quick-connect terminals
Mounting: Foot-mounted
Power Consumption: Driving-20 VA
Timing, Nominal: 30 - 60 sec
Feedback: No
Shaft Dimensions: 0.375 in. Square (10 mm Square)
Motor shafts: 2; Dual-ended shaft
Deadweight Load on Shaft: Either End 200 lbs.; Combined on both Shafts 300 lbs.
Approximate, Dimensions: 6 7/16 in. high x 5 1/2 in. wide x 8 3/4 in.
deep (164 mm high x 140 mm wide x 222 mm deep)
Ambient Temperature Range: -40°F to +150°F (-40°C to +60°C)
Approvals, Underwriters Laboratories Inc.: Listed: File No. E4436, Guide No. XAPX for USA and Canada
Approvals, CE: EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
Approvals, RoHS: 2011/65/ES
Accessories:
220736A/U Internal Auxiliary Switch Assembly - 1 Switch
220736B/U Internal Auxiliary Switch Assembly - 2 Switches
220738A/U Adapter Bracket. Adjusts shaft height to match Modutrol III motors
220741A2-TP/U Screw Terminal Adapter Kit for 2 position Modutrol IV Series 2 motors - Converts quick-connect terminals to screw terminals
221455A/U Infinitely adjustable Motor Crank Arm
4074ERU/U Weatherproofing kit. Protects motor from driving rain when mounted in any position. Not needed if motor is mounted upright.
50017460-001/U 24/120/230 Vac Internal Transformers for Series 2 Motors
50017460-003/U 120 Vac Internal Transformers for Series 2 Motors
Product Details
Voltage: 24Vac, 50/60Hz
Torque: 60 lb-in
Timing: 30-60 sec
Stroke: Adjustable 90-160°, preset at 160°
View more about Honeywell M8185D1006 modutrol motor on main site