Honeywell M9484E1009 modutrol motor
Category: Modutrol Motor
Specifications
Honeywell M9484E1009 modutrol motor
Reversing, proportional motors used to drive burner firing rate valves, dampers or auxiliary equipment. Replaces M941A, C, D motors.
Designed for flame safeguard applications in commercial/industrial oil or gas burner system.
Vibration resistant electronic drive circuit.
Regulated by three-wire proportional controller.
Stroke is field-adjustable to 90 or 160 degrees.
Features
Frequency: 50 Hz; 60 Hz
Stroke: Adjustable; 90 to 160 degrees, Symmetrical
Power Consumption: 15 W
Input Signal: 135 ohm
Shaft Dimensions: double-ended, 3/8 in. square (double-ended, 9.5 mm square)
Deadweight Load on Shaft: Either End 200 lb (300 lb combined power and auxiliary shafts); 90.8 kg (136 kg combined power and auxiliary shafts)
Approximate, Dimensions: 6.45 in high x 5.5 in wide x 7.3 in deep
(164 mm high x 140 mm wide x 185 mm deep)
Ambient Temperature Range: -40°F to +150°F (-40°C to +66°C)
Approvals, Underwriters Laboratories Inc.: Listed: File No. E4436, Guide No. XAPX for USA and Canada
Supply Voltage: 24 Vac
Accessories:
Q100B1006/U Linkage to connect Modutrol motor to V51E Butterfly Valve. Includes 10 3/4 inch Linkage Rod
Product Details
Voltage: 24Vac, 50/60Hz
Torque: 75 lb-in
Timing: 15-30 sec
Stroke: Adjustable 90-160°, preset at 90°
c/w 1 auxiliary switch
View more about Honeywell M9484E1009 modutrol motor on main site